Sets our main struct and passes it to the parent class.
Create a new gtk.SizeGroup
Adds a widget to a gtk.SizeGroup In the future, the requisition of the widget will be determined as the maximum of its requisition and the requisition of the other widgets in the size group. Whether this applies horizontally, vertically, or in both directions depends on the mode of the size group. See SizeGroup.setMode.
Returns if invisible widgets are ignored when calculating the size.
Gets the current mode of the size group. See SizeGroup.setMode.
Get the main Gtk struct
the main Gtk struct as a void*
Returns the list of widgets associated with size_group.
Removes a widget from a gtk.SizeGroup
Sets whether unmapped widgets should be ignored when calculating the size.
Sets the GtkSizeGroupMode of the size group. The mode of the size group determines whether the widgets in the size group should all have the same horizontal requisition (GTK_SIZE_GROUP_HORIZONTAL) all have the same vertical requisition (GTK_SIZE_GROUP_VERTICAL), or should all have the same requisition in both directions (GTK_SIZE_GROUP_BOTH).
the main Gtk struct
the main Gtk struct
Get the main Gtk struct
the main Gtk struct as a void*
Gets a D Object from the objects table of associations.
The notify signal is emitted on an object when one of its properties has been changed. Note that getting this signal doesn't guarantee that the value of the property has actually changed, it may also be emitted when the setter for the property is called to reinstate the previous value.
Find the gobject.ParamSpec with the given name for an interface. Generally, the interface vtable passed in as g_iface will be the default vtable from g_type_default_interface_ref(), or, if you know the interface has already been loaded, g_type_default_interface_peek().
Add a property to an interface; this is only useful for interfaces that are added to GObject-derived types. Adding a property to an interface forces all objects classes with that interface to have a compatible property. The compatible property could be a newly created gobject.ParamSpec, but normally ObjectClass.overrideProperty will be used so that the object class only needs to provide an implementation and inherits the property description, default value, bounds, and so forth from the interface property.
Lists the properties of an interface.Generally, the interface vtable passed in as g_iface will be the default vtable from g_type_default_interface_ref(), or, if you know the interface has already been loaded, g_type_default_interface_peek().
Increases the reference count of the object by one and sets a callback to be called when all other references to the object are dropped, or when this is already the last reference to the object and another reference is established.
Adds a weak reference from weak_pointer to object to indicate that the pointer located at weak_pointer_location is only valid during the lifetime of object. When the object is finalized, weak_pointer will be set to NULL.
Creates a binding between source_property on source and target_property on target. Whenever the source_property is changed the target_property is updated using the same value. For instance:
Complete version of g_object_bind_property().
Creates a binding between source_property on source and target_property on target, allowing you to set the transformation functions to be used by the binding.
This is a variant of g_object_get_data() which returns a 'duplicate' of the value. dup_func defines the meaning of 'duplicate' in this context, it could e.g. take a reference on a ref-counted object.
This is a variant of g_object_get_qdata() which returns a 'duplicate' of the value. dup_func defines the meaning of 'duplicate' in this context, it could e.g. take a reference on a ref-counted object.
This function is intended for GObject implementations to re-enforce a floating[floating-ref] object reference. Doing this is seldom required: all GInitiallyUnowneds are created with a floating reference which usually just needs to be sunken by calling g_object_ref_sink().
Increases the freeze count on object. If the freeze count is non-zero, the emission of "notify" signals on object is stopped. The signals are queued until the freeze count is decreased to zero. Duplicate notifications are squashed so that at most one notify signal is emitted for each property modified while the object is frozen.
Gets a named field from the objects table of associations (see g_object_set_data()).
Gets a property of an object.
This function gets back user data pointers stored via g_object_set_qdata().
Gets properties of an object.
Gets n_properties properties for an object. Obtained properties will be set to values. All properties must be valid. Warnings will be emitted and undefined behaviour may result if invalid properties are passed in.
Checks whether object has a floating[floating-ref] reference.
Emits a "notify" signal for the property property_name on object.
Emits a "notify" signal for the property specified by pspec on object.
Increases the reference count of object.
Increase the reference count of object, and possibly remove the floating[floating-ref] reference, if object has a floating reference.
Removes a reference added with g_object_add_toggle_ref(). The reference count of the object is decreased by one.
Removes a weak reference from object that was previously added using g_object_add_weak_pointer(). The weak_pointer_location has to match the one used with g_object_add_weak_pointer().
Compares the user data for the key key on object with oldval, and if they are the same, replaces oldval with newval.
Compares the user data for the key quark on object with oldval, and if they are the same, replaces oldval with newval.
Releases all references to other objects. This can be used to break reference cycles.
Each object carries around a table of associations from strings to pointers. This function lets you set an association.
Like g_object_set_data() except it adds notification for when the association is destroyed, either by setting it to a different value or when the object is destroyed.
Sets a property on an object.
This sets an opaque, named pointer on an object. The name is specified through a GQuark (retrived e.g. via g_quark_from_static_string()), and the pointer can be gotten back from the object with g_object_get_qdata() until the object is finalized. Setting a previously set user data pointer, overrides (frees) the old pointer set, using NULL as pointer essentially removes the data stored.
This function works like g_object_set_qdata(), but in addition, a void (*destroy) (gpointer) function may be specified which is called with data as argument when the object is finalized, or the data is being overwritten by a call to g_object_set_qdata() with the same quark.
Sets properties on an object.
Sets n_properties properties for an object. Properties to be set will be taken from values. All properties must be valid. Warnings will be emitted and undefined behaviour may result if invalid properties are passed in.
Remove a specified datum from the object's data associations, without invoking the association's destroy handler.
This function gets back user data pointers stored via g_object_set_qdata() and removes the data from object without invoking its destroy() function (if any was set). Usually, calling this function is only required to update user data pointers with a destroy notifier, for example:
Reverts the effect of a previous call to g_object_freeze_notify(). The freeze count is decreased on object and when it reaches zero, queued "notify" signals are emitted.
Decreases the reference count of object. When its reference count drops to 0, the object is finalized (i.e. its memory is freed).
This function essentially limits the life time of the closure to the life time of the object. That is, when the object is finalized, the closure is invalidated by calling Closure.invalidate on it, in order to prevent invocations of the closure with a finalized (nonexisting) object. Also, g_object_ref() and g_object_unref() are added as marshal guards to the closure, to ensure that an extra reference count is held on object during invocation of the closure. Usually, this function will be called on closures that use this object as closure data.
Adds a weak reference callback to an object. Weak references are used for notification when an object is finalized. They are called "weak references" because they allow you to safely hold a pointer to an object without calling g_object_ref() (g_object_ref() adds a strong reference, that is, forces the object to stay alive).
Removes a weak reference callback to an object.
Clears a reference to a GObject
Get the main Gtk struct
the main Gtk struct as a void*
Adds a child to buildable. type is an optional string describing how the child should be added.
Constructs a child of buildable with the name name.
This is similar to gtk_buildable_parser_finished() but is called once for each custom tag handled by the buildable.
This is called at the end of each custom element handled by the buildable.
This is called for each unknown element under <child>.
Get the internal child called childname of the buildable object.
Gets the name of the buildable object.
Called when the builder finishes the parsing of a [GtkBuilder UI definition][BUILDER-UI]. Note that this will be called once for each time Builder.addFromFile or Builder.addFromString is called on a builder.
Sets the property name name to value on the buildable object.
Sets the name of the buildable object.
gtk.SizeGroup provides a mechanism for grouping a number of widgets together so they all request the same amount of space. This is typically useful when you want a column of widgets to have the same size, but you can’t use a gtk.Grid widget.
In detail, the size requested for each widget in a gtk.SizeGroup is the maximum of the sizes that would have been requested for each widget in the size group if they were not in the size group. The mode of the size group (see SizeGroup.setMode) determines whether this applies to the horizontal size, the vertical size, or both sizes.
Note that size groups only affect the amount of space requested, not the size that the widgets finally receive. If you want the widgets in a gtk.SizeGroup to actually be the same size, you need to pack them in such a way that they get the size they request and not more. For example, if you are packing your widgets into a table, you would not include the GTK_FILL flag.
gtk.SizeGroup objects are referenced by each widget in the size group, so once you have added all widgets to a gtk.SizeGroup, you can drop the initial reference to the size group with g_object_unref(). If the widgets in the size group are subsequently destroyed, then they will be removed from the size group and drop their references on the size group; when all widgets have been removed, the size group will be freed.
Widgets can be part of multiple size groups; GTK+ will compute the horizontal size of a widget from the horizontal requisition of all widgets that can be reached from the widget by a chain of size groups of type GTK_SIZE_GROUP_HORIZONTAL or GTK_SIZE_GROUP_BOTH, and the vertical size from the vertical requisition of all widgets that can be reached from the widget by a chain of size groups of type GTK_SIZE_GROUP_VERTICAL or GTK_SIZE_GROUP_BOTH.
Note that only non-contextual sizes of every widget are ever consulted by size groups (since size groups have no knowledge of what size a widget will be allocated in one dimension, it cannot derive how much height a widget will receive for a given width). When grouping widgets that trade height for width in mode GTK_SIZE_GROUP_VERTICAL or GTK_SIZE_GROUP_BOTH: the height for the minimum width will be the requested height for all widgets in the group. The same is of course true when horizontally grouping width for height widgets.
Widgets that trade height-for-width should set a reasonably large minimum width by way of width-chars for instance. Widgets with static sizes as well as widgets that grow (such as ellipsizing text) need no such considerations.
GtkSizeGroup as GtkBuildable
Size groups can be specified in a UI definition by placing an <object> element with class="GtkSizeGroup" somewhere in the UI definition. The widgets that belong to the size group are specified by a <widgets> element that may contain multiple <widget> elements, one for each member of the size group. The ”name” attribute gives the id of the widget.
An example of a UI definition fragment with GtkSizeGroup: |[ <object class="GtkSizeGroup"> <property name="mode">GTK_SIZE_GROUP_HORIZONTAL</property> <widgets> <widget name="radio1"/> <widget name="radio2"/> </widgets> </object>