GIOStream represents an object that has both read and write streams. Generally the two streams act as separate input and output streams, but they share some common resources and state. For instance, for seekable streams, both streams may use the same position.
To do the actual reading and writing you need to get the substreams with g_io_stream_get_input_stream() and g_io_stream_get_output_stream().
The gio.IOStream object owns the input and the output streams, not the other way around, so keeping the substreams alive will not keep the gio.IOStream object alive. If the gio.IOStream object is freed it will be closed, thus closing the substreams, so even if the substreams stay alive they will always return G_IO_ERROR_CLOSED for all operations.
To close a stream use g_io_stream_close() which will close the common stream object and also the individual substreams. You can also close the substreams themselves. In most cases this only marks the substream as closed, so further I/O on it fails but common state in the gio.IOStream may still be open. However, some streams may support "half-closed" states where one direction of the stream is actually shut down.
Operations on gio.IOStreams cannot be started while another operation on the gio.IOStream or its substreams is in progress. Specifically, an application can read from the gio.InputStream and write to the gio.OutputStream simultaneously (either in separate threads, or as asynchronous operations in the same thread), but an application cannot start any gio.IOStream operation while there is a gio.IOStream, gio.InputStream or gio.OutputStream operation in progress, and an application can’t start any gio.InputStream or gio.OutputStream operation while there is a gio.IOStream operation in progress.
This is a product of individual stream operations being associated with a given glib.MainContext (the thread-default context at the time the operation was started), rather than entire streams being associated with a single glib.MainContext
GIO may run operations on gio.IOStreams from other (worker) threads, and this may be exposed to application code in the behaviour of wrapper streams, such as gio.BufferedInputStream or gio.TlsConnection With such wrapper APIs, application code may only run operations on the base (wrapped) stream when the wrapper stream is idle. Note that the semantics of such operations may not be well-defined due to the state the wrapper stream leaves the base stream in (though they are guaranteed not to crash).
Sets our main struct and passes it to the parent class.
Clears the pending flag on stream.
Closes the stream, releasing resources related to it. This will also close the individual input and output streams, if they are not already closed.
Requests an asynchronous close of the stream, releasing resources related to it. When the operation is finished callback will be called. You can then call g_io_stream_close_finish() to get the result of the operation.
Closes a stream.
Get the main Gtk struct
Gets the input stream for this object. This is used for reading.
Gets the output stream for this object. This is used for writing.
the main Gtk struct as a void*
Checks if a stream has pending actions.
Checks if a stream is closed.
Sets stream to have actions pending. If the pending flag is already set or stream is closed, it will return FALSE and set error.
Asyncronously splice the output stream of stream1 to the input stream of stream2, and splice the output stream of stream2 to the input stream of stream1.
Finishes an asynchronous io stream splice operation.
the main Gtk struct
the main Gtk struct
Get the main Gtk struct
the main Gtk struct as a void*
Gets a D Object from the objects table of associations.
The notify signal is emitted on an object when one of its properties has been changed. Note that getting this signal doesn't guarantee that the value of the property has actually changed, it may also be emitted when the setter for the property is called to reinstate the previous value.
Find the gobject.ParamSpec with the given name for an interface. Generally, the interface vtable passed in as g_iface will be the default vtable from g_type_default_interface_ref(), or, if you know the interface has already been loaded, g_type_default_interface_peek().
Add a property to an interface; this is only useful for interfaces that are added to GObject-derived types. Adding a property to an interface forces all objects classes with that interface to have a compatible property. The compatible property could be a newly created gobject.ParamSpec, but normally ObjectClass.overrideProperty will be used so that the object class only needs to provide an implementation and inherits the property description, default value, bounds, and so forth from the interface property.
Lists the properties of an interface.Generally, the interface vtable passed in as g_iface will be the default vtable from g_type_default_interface_ref(), or, if you know the interface has already been loaded, g_type_default_interface_peek().
Increases the reference count of the object by one and sets a callback to be called when all other references to the object are dropped, or when this is already the last reference to the object and another reference is established.
Adds a weak reference from weak_pointer to object to indicate that the pointer located at weak_pointer_location is only valid during the lifetime of object. When the object is finalized, weak_pointer will be set to NULL.
Creates a binding between source_property on source and target_property on target. Whenever the source_property is changed the target_property is updated using the same value. For instance:
Complete version of g_object_bind_property().
Creates a binding between source_property on source and target_property on target, allowing you to set the transformation functions to be used by the binding.
This is a variant of g_object_get_data() which returns a 'duplicate' of the value. dup_func defines the meaning of 'duplicate' in this context, it could e.g. take a reference on a ref-counted object.
This is a variant of g_object_get_qdata() which returns a 'duplicate' of the value. dup_func defines the meaning of 'duplicate' in this context, it could e.g. take a reference on a ref-counted object.
Increases the freeze count on object. If the freeze count is non-zero, the emission of "notify" signals on object is stopped. The signals are queued until the freeze count is decreased to zero. Duplicate notifications are squashed so that at most one notify signal is emitted for each property modified while the object is frozen.
Gets a named field from the objects table of associations (see g_object_set_data()).
Gets a property of an object.
This function gets back user data pointers stored via g_object_set_qdata().
Gets properties of an object.
Gets n_properties properties for an object. Obtained properties will be set to values. All properties must be valid. Warnings will be emitted and undefined behaviour may result if invalid properties are passed in.
Checks whether object has a floating[floating-ref] reference.
Emits a "notify" signal for the property property_name on object.
Emits a "notify" signal for the property specified by pspec on object.
Increases the reference count of object.
Increase the reference count of object, and possibly remove the floating[floating-ref] reference, if object has a floating reference.
Removes a reference added with g_object_add_toggle_ref(). The reference count of the object is decreased by one.
Removes a weak reference from object that was previously added using g_object_add_weak_pointer(). The weak_pointer_location has to match the one used with g_object_add_weak_pointer().
Compares the user data for the key key on object with oldval, and if they are the same, replaces oldval with newval.
Compares the user data for the key quark on object with oldval, and if they are the same, replaces oldval with newval.
Releases all references to other objects. This can be used to break reference cycles.
Each object carries around a table of associations from strings to pointers. This function lets you set an association.
Like g_object_set_data() except it adds notification for when the association is destroyed, either by setting it to a different value or when the object is destroyed.
Sets a property on an object.
This sets an opaque, named pointer on an object. The name is specified through a GQuark (retrived e.g. via g_quark_from_static_string()), and the pointer can be gotten back from the object with g_object_get_qdata() until the object is finalized. Setting a previously set user data pointer, overrides (frees) the old pointer set, using NULL as pointer essentially removes the data stored.
This function works like g_object_set_qdata(), but in addition, a void (*destroy) (gpointer) function may be specified which is called with data as argument when the object is finalized, or the data is being overwritten by a call to g_object_set_qdata() with the same quark.
Sets properties on an object.
Sets n_properties properties for an object. Properties to be set will be taken from values. All properties must be valid. Warnings will be emitted and undefined behaviour may result if invalid properties are passed in.
Remove a specified datum from the object's data associations, without invoking the association's destroy handler.
This function gets back user data pointers stored via g_object_set_qdata() and removes the data from object without invoking its destroy() function (if any was set). Usually, calling this function is only required to update user data pointers with a destroy notifier, for example:
Reverts the effect of a previous call to g_object_freeze_notify(). The freeze count is decreased on object and when it reaches zero, queued "notify" signals are emitted.
Decreases the reference count of object. When its reference count drops to 0, the object is finalized (i.e. its memory is freed).
This function essentially limits the life time of the closure to the life time of the object. That is, when the object is finalized, the closure is invalidated by calling Closure.invalidate on it, in order to prevent invocations of the closure with a finalized (nonexisting) object. Also, g_object_ref() and g_object_unref() are added as marshal guards to the closure, to ensure that an extra reference count is held on object during invocation of the closure. Usually, this function will be called on closures that use this object as closure data.
Adds a weak reference callback to an object. Weak references are used for notification when an object is finalized. They are called "weak references" because they allow you to safely hold a pointer to an object without calling g_object_ref() (g_object_ref() adds a strong reference, that is, forces the object to stay alive).
Removes a weak reference callback to an object.
Clears a reference to a GObject