Pad

A gstreamer.Element is linked to other elements via "pads", which are extremely light-weight generic link points.

Pads have a GstPadDirection, source pads produce data, sink pads consume data.

Pads are typically created from a gstreamer.PadTemplate with Pad.newFromTemplate and are then added to a gstreamer.Element This usually happens when the element is created but it can also happen dynamically based on the data that the element is processing or based on the pads that the application requests.

Pads without pad templates can be created with Pad.new, which takes a direction and a name as an argument. If the name is NULL, then a guaranteed unique name will be assigned to it.

A gstreamer.Element creating a pad will typically use the various gst_pad_set_*_function() calls to register callbacks for events, queries or dataflow on the pads.

Pad.getParent will retrieve the gstreamer.Element that owns the pad.

After two pads are retrieved from an element by Element.getStaticPad, the pads can be linked with Pad.link. (For quick links, you can also use Element.link, which will make the obvious link for you if it's straightforward.). Pads can be unlinked again with Pad.unlink. Pad.getPeer can be used to check what the pad is linked to.

Before dataflow is possible on the pads, they need to be activated with Pad.setActive.

Pad.query and Pad.peerQuery can be used to query various properties of the pad and the stream.

To send a gstreamer.Event on a pad, use Pad.sendEvent and Pad.pushEvent. Some events will be sticky on the pad, meaning that after they pass on the pad they can be queried later with Pad.getStickyEvent and Pad.stickyEventsForeach. Pad.getCurrentCaps and Pad.hasCurrentCaps are convenience functions to query the current sticky CAPS event on a pad.

GstElements will use Pad.push and Pad.pullRange to push out or pull in a buffer.

The dataflow, events and queries that happen on a pad can be monitored with probes that can be installed with Pad.addProbe. Pad.isBlocked can be used to check if a block probe is installed on the pad. Pad.isBlocking checks if the blocking probe is currently blocking the pad. Pad.removeProbe is used to remove a previously installed probe and unblock blocking probes if any.

Pad have an offset that can be retrieved with Pad.getOffset. This offset will be applied to the running_time of all data passing over the pad. Pad.setOffset can be used to change the offset.

Convenience functions exist to start, pause and stop the task on a pad with Pad.startTask, Pad.pauseTask and Pad.stopTask respectively.

class Pad : ObjectGst {

GstPad* gstPad;

GstPad* getPadStruct(bool transferOwnership);

void* getStruct();

this(GstPad* gstPad, bool ownedRef);

long queryPosition();

long queryDuration();

static GType getType();

this(string name, GstPadDirection direction);

this(StaticPadTemplate templ, string name);

this(PadTemplate templ, string name);

static string linkGetName(GstPadLinkReturn ret);

bool activateMode(GstPadMode mode, bool active);

gulong addProbe(GstPadProbeType mask, GstPadProbeCallback callback, void* userData, GDestroyNotify destroyData);

bool canLink(Pad sinkpad);

GstFlowReturn chain(Buffer buffer);

GstFlowReturn chainList(BufferList list);

bool checkReconfigure();

string createStreamId(Element parent, string streamId);

string createStreamIdPrintfValist(Element parent, string streamId, void* varArgs);

bool eventDefault(ObjectGst parent, Event event);

bool forward(GstPadForwardFunction forward, void* userData);

Caps getAllowedCaps();

Caps getCurrentCaps();

GstPadDirection getDirection();

void* getElementPrivate();

GstFlowReturn getLastFlowReturn();

long getOffset();

PadTemplate getPadTemplate();

Caps getPadTemplateCaps();

Element getParentElement();

Pad getPeer();

GstFlowReturn getRange(ulong offset, uint size, Buffer buffer);

Event getStickyEvent(GstEventType eventType, uint idx);

Stream getStream();

string getStreamId();

GstTaskState getTaskState();

bool hasCurrentCaps();

bool isActive();

bool isBlocked();

bool isBlocking();

bool isLinked();

Iterator iterateInternalLinks();

Iterator iterateInternalLinksDefault(ObjectGst parent);

GstPadLinkReturn link(Pad sinkpad);

GstPadLinkReturn linkFull(Pad sinkpad, GstPadLinkCheck flags);

bool linkMaybeGhosting(Pad sink);

bool linkMaybeGhostingFull(Pad sink, GstPadLinkCheck flags);

void markReconfigure();

bool needsReconfigure();

bool pauseTask();

bool peerQuery(Query query);

bool peerQueryAcceptCaps(Caps caps);

Caps peerQueryCaps(Caps filter);

bool peerQueryConvert(GstFormat srcFormat, long srcVal, GstFormat destFormat, long destVal);

bool peerQueryDuration(GstFormat format, long duration);

bool peerQueryPosition(GstFormat format, long cur);

bool proxyQueryAcceptCaps(Query query);

bool proxyQueryCaps(Query query);

GstFlowReturn pullRange(ulong offset, uint size, Buffer buffer);

GstFlowReturn push(Buffer buffer);

bool pushEvent(Event event);

GstFlowReturn pushList(BufferList list);

bool query(Query query);

bool queryAcceptCaps(Caps caps);

Caps queryCaps(Caps filter);

bool queryConvert(GstFormat srcFormat, long srcVal, GstFormat destFormat, long destVal);

bool queryDefault(ObjectGst parent, Query query);

bool queryDuration(GstFormat format, long duration);

bool queryPosition(GstFormat format, long cur);

void removeProbe(gulong id);

bool sendEvent(Event event);

void setActivateFunctionFull(GstPadActivateFunction activate, void* userData, GDestroyNotify notify);

void setActivatemodeFunctionFull(GstPadActivateModeFunction activatemode, void* userData, GDestroyNotify notify);

bool setActive(bool active);

void setChainFunctionFull(GstPadChainFunction chain, void* userData, GDestroyNotify notify);

void setChainListFunctionFull(GstPadChainListFunction chainlist, void* userData, GDestroyNotify notify);

void setElementPrivate(void* priv);

void setEventFullFunctionFull(GstPadEventFullFunction event, void* userData, GDestroyNotify notify);

void setEventFunctionFull(GstPadEventFunction event, void* userData, GDestroyNotify notify);

void setGetrangeFunctionFull(GstPadGetRangeFunction get, void* userData, GDestroyNotify notify);

void setIterateInternalLinksFunctionFull(GstPadIterIntLinkFunction iterintlink, void* userData, GDestroyNotify notify);

void setLinkFunctionFull(GstPadLinkFunction link, void* userData, GDestroyNotify notify);

void setOffset(long offset);

void setQueryFunctionFull(GstPadQueryFunction query, void* userData, GDestroyNotify notify);

void setUnlinkFunctionFull(GstPadUnlinkFunction unlink, void* userData, GDestroyNotify notify);

bool startTask(GstTaskFunction func, void* userData, GDestroyNotify notify);

void stickyEventsForeach(GstPadStickyEventsForeachFunction foreachFunc, void* userData);

bool stopTask();

GstFlowReturn storeStickyEvent(Event event);

bool unlink(Pad sinkpad);

void useFixedCaps();

gulong addOnLinked(void delegate(Pad, Pad) dlg, ConnectFlags connectFlags);

gulong addOnUnlinked(void delegate(Pad, Pad) dlg, ConnectFlags connectFlags);

static string flowGetName(GstFlowReturn ret);

static GQuark flowToQuark(GstFlowReturn ret);

static string modeGetName(GstPadMode mode);

}

Constructors

this this(GstPad* gstPad, bool ownedRef): Sets our main struct and passes it to the parent class.
this this(string name, GstPadDirection direction): Creates a new pad with the given name in the given direction. If name is NULL, a guaranteed unique name (across all pads) will be assigned. This function makes a copy of the name so you can safely free the name.
this this(StaticPadTemplate templ, string name): Creates a new pad with the given name from the given static template. If name is NULL, a guaranteed unique name (across all pads) will be assigned. This function makes a copy of the name so you can safely free the name.
this this(PadTemplate templ, string name): Creates a new pad with the given name from the given template. If name is NULL, a guaranteed unique name (across all pads) will be assigned. This function makes a copy of the name so you can safely free the name.

Members

Functions

activateMode bool activateMode(GstPadMode mode, bool active): Activates or deactivates the given pad in mode via dispatching to the pad's activatemodefunc. For use from within pad activation functions only.
addOnLinked gulong addOnLinked(void delegate(Pad, Pad) dlg, ConnectFlags connectFlags): Signals that a pad has been linked to the peer pad.
addOnUnlinked gulong addOnUnlinked(void delegate(Pad, Pad) dlg, ConnectFlags connectFlags): Signals that a pad has been unlinked from the peer pad.
addProbe gulong addProbe(GstPadProbeType mask, GstPadProbeCallback callback, void* userData, GDestroyNotify destroyData): Be notified of different states of pads. The provided callback is called for every state that matches mask.
canLink bool canLink(Pad sinkpad): Checks if the source pad and the sink pad are compatible so they can be linked.
chain GstFlowReturn chain(Buffer buffer): Chain a buffer to pad.
chainList GstFlowReturn chainList(BufferList list): Chain a bufferlist to pad.
checkReconfigure bool checkReconfigure(): Check and clear the GST_PAD_FLAG_NEED_RECONFIGURE flag on pad and return TRUE if the flag was set.
createStreamId string createStreamId(Element parent, string streamId): Creates a stream-id for the source gstreamer.Pad pad by combining the upstream information with the optional stream_id of the stream of pad. pad must have a parent gstreamer.Element and which must have zero or one sinkpad. stream_id can only be NULL if the parent element of pad has only a single source pad.
createStreamIdPrintfValist string createStreamIdPrintfValist(Element parent, string streamId, void* varArgs): Creates a stream-id for the source gstreamer.Pad pad by combining the upstream information with the optional stream_id of the stream of pad. pad must have a parent gstreamer.Element and which must have zero or one sinkpad. stream_id can only be NULL if the parent element of pad has only a single source pad.
eventDefault bool eventDefault(ObjectGst parent, Event event): Invokes the default event handler for the given pad.
forward bool forward(GstPadForwardFunction forward, void* userData): Calls forward for all internally linked pads of pad. This function deals with dynamically changing internal pads and will make sure that the forward function is only called once for each pad.
getAllowedCaps Caps getAllowedCaps(): Gets the capabilities of the allowed media types that can flow through pad and its peer.
getCurrentCaps Caps getCurrentCaps(): Gets the capabilities currently configured on pad with the last GST_EVENT_CAPS event.
getDirection GstPadDirection getDirection(): Gets the direction of the pad. The direction of the pad is decided at construction time so this function does not take the LOCK.
getElementPrivate void* getElementPrivate(): Gets the private data of a pad. No locking is performed in this function.
getLastFlowReturn GstFlowReturn getLastFlowReturn(): Gets the GstFlowReturn return from the last data passed by this pad.
getOffset long getOffset(): Get the offset applied to the running time of pad. pad has to be a source pad.
getPadStruct GstPad* getPadStruct(bool transferOwnership): Get the main Gtk struct
getPadTemplate PadTemplate getPadTemplate(): Gets the template for pad.
getPadTemplateCaps Caps getPadTemplateCaps(): Gets the capabilities for pad's template.
getParentElement Element getParentElement(): Gets the parent of pad, cast to a gstreamer.Element If a pad has no parent or its parent is not an element, return NULL.
getPeer Pad getPeer(): Gets the peer of pad. This function refs the peer pad so you need to unref it after use.
getRange GstFlowReturn getRange(ulong offset, uint size, Buffer buffer): When pad is flushing this function returns GST_FLOW_FLUSHING immediately and buffer is NULL.
getStickyEvent Event getStickyEvent(GstEventType eventType, uint idx): Returns a new reference of the sticky event of type event_type from the event.
getStream Stream getStream(): Returns the current gstreamer.Stream for the pad, or NULL if none has been set yet, i.e. the pad has not received a stream-start event yet.
getStreamId string getStreamId(): Returns the current stream-id for the pad, or NULL if none has been set yet, i.e. the pad has not received a stream-start event yet.
getStruct void* getStruct(): the main Gtk struct as a void*
getTaskState GstTaskState getTaskState(): Get pad task state. If no task is currently set, GST_TASK_STOPPED is returned.
hasCurrentCaps bool hasCurrentCaps(): Check if pad has caps set on it with a GST_EVENT_CAPS event.
isActive bool isActive(): Query if a pad is active
isBlocked bool isBlocked(): Checks if the pad is blocked or not. This function returns the last requested state of the pad. It is not certain that the pad is actually blocking at this point (see Pad.isBlocking).
isBlocking bool isBlocking(): Checks if the pad is blocking or not. This is a guaranteed state of whether the pad is actually blocking on a gstreamer.Buffer or a gstreamer.Event
isLinked bool isLinked(): Checks if a pad is linked to another pad or not.
iterateInternalLinks Iterator iterateInternalLinks(): Gets an iterator for the pads to which the given pad is linked to inside of the parent element.
iterateInternalLinksDefault Iterator iterateInternalLinksDefault(ObjectGst parent): Iterate the list of pads to which the given pad is linked to inside of the parent element. This is the default handler, and thus returns an iterator of all of the pads inside the parent element with opposite direction.
link GstPadLinkReturn link(Pad sinkpad): Links the source pad and the sink pad.
linkFull GstPadLinkReturn linkFull(Pad sinkpad, GstPadLinkCheck flags): Links the source pad and the sink pad.
linkMaybeGhosting bool linkMaybeGhosting(Pad sink): Links src to sink, creating any gstreamer.GhostPad's in between as necessary.
linkMaybeGhostingFull bool linkMaybeGhostingFull(Pad sink, GstPadLinkCheck flags): Links src to sink, creating any gstreamer.GhostPad's in between as necessary.
markReconfigure void markReconfigure(): Mark a pad for needing reconfiguration. The next call to Pad.checkReconfigure will return TRUE after this call.
needsReconfigure bool needsReconfigure(): Check the GST_PAD_FLAG_NEED_RECONFIGURE flag on pad and return TRUE if the flag was set.
pauseTask bool pauseTask(): Pause the task of pad. This function will also wait until the function executed by the task is finished if this function is not called from the task function.
peerQuery bool peerQuery(Query query): Performs Pad.query on the peer of pad.
peerQueryAcceptCaps bool peerQueryAcceptCaps(Caps caps): Check if the peer of pad accepts caps. If pad has no peer, this function returns TRUE.
peerQueryCaps Caps peerQueryCaps(Caps filter): Gets the capabilities of the peer connected to this pad. Similar to Pad.queryCaps.
peerQueryConvert bool peerQueryConvert(GstFormat srcFormat, long srcVal, GstFormat destFormat, long destVal): Queries the peer pad of a given sink pad to convert src_val in src_format to dest_format.
peerQueryDuration bool peerQueryDuration(GstFormat format, long duration): Queries the peer pad of a given sink pad for the total stream duration.
peerQueryPosition bool peerQueryPosition(GstFormat format, long cur): Queries the peer of a given sink pad for the stream position.
proxyQueryAcceptCaps bool proxyQueryAcceptCaps(Query query): Checks if all internally linked pads of pad accepts the caps in query and returns the intersection of the results.
proxyQueryCaps bool proxyQueryCaps(Query query): Calls Pad.queryCaps for all internally linked pads of pad and returns the intersection of the results.
pullRange GstFlowReturn pullRange(ulong offset, uint size, Buffer buffer): Pulls a buffer from the peer pad or fills up a provided buffer.
push GstFlowReturn push(Buffer buffer): Pushes a buffer to the peer of pad.
pushEvent bool pushEvent(Event event): Sends the event to the peer of the given pad. This function is mainly used by elements to send events to their peer elements.
pushList GstFlowReturn pushList(BufferList list): Pushes a buffer list to the peer of pad.
query bool query(Query query): Dispatches a query to a pad. The query should have been allocated by the caller via one of the type-specific allocation functions. The element that the pad belongs to is responsible for filling the query with an appropriate response, which should then be parsed with a type-specific query parsing function.
queryAcceptCaps bool queryAcceptCaps(Caps caps): Check if the given pad accepts the caps.
queryCaps Caps queryCaps(Caps filter): Gets the capabilities this pad can produce or consume. Note that this method doesn't necessarily return the caps set by sending a Event.newCaps - use Pad.getCurrentCaps for that instead. gst_pad_query_caps returns all possible caps a pad can operate with, using the pad's CAPS query function, If the query fails, this function will return filter, if not NULL, otherwise ANY.
queryConvert bool queryConvert(GstFormat srcFormat, long srcVal, GstFormat destFormat, long destVal): Queries a pad to convert src_val in src_format to dest_format.
queryDefault bool queryDefault(ObjectGst parent, Query query): Invokes the default query handler for the given pad. The query is sent to all pads internally linked to pad. Note that if there are many possible sink pads that are internally linked to pad, only one will be sent the query. Multi-sinkpad elements should implement custom query handlers.
queryDuration long queryDuration(): Queries a pad for the stream duration. This is a convenience function for gstreamerD.
queryDuration bool queryDuration(GstFormat format, long duration): Queries a pad for the total stream duration.
queryPosition long queryPosition(): Queries a pad for the stream position. This is a convenience function for gstreamerD.
queryPosition bool queryPosition(GstFormat format, long cur): Queries a pad for the stream position.
removeProbe void removeProbe(gulong id): Remove the probe with id from pad.
sendEvent bool sendEvent(Event event): Sends the event to the pad. This function can be used by applications to send events in the pipeline.
setActivateFunctionFull void setActivateFunctionFull(GstPadActivateFunction activate, void* userData, GDestroyNotify notify): Sets the given activate function for pad. The activate function will dispatch to Pad.activateMode to perform the actual activation. Only makes sense to set on sink pads.
setActivatemodeFunctionFull void setActivatemodeFunctionFull(GstPadActivateModeFunction activatemode, void* userData, GDestroyNotify notify): Sets the given activate_mode function for the pad. An activate_mode function prepares the element for data passing.
setActive bool setActive(bool active): Activates or deactivates the given pad. Normally called from within core state change functions.
setChainFunctionFull void setChainFunctionFull(GstPadChainFunction chain, void* userData, GDestroyNotify notify): Sets the given chain function for the pad. The chain function is called to process a gstreamer.Buffer input buffer. see GstPadChainFunction for more details.
setChainListFunctionFull void setChainListFunctionFull(GstPadChainListFunction chainlist, void* userData, GDestroyNotify notify): Sets the given chain list function for the pad. The chainlist function is called to process a gstreamer.BufferList input buffer list. See GstPadChainListFunction for more details.
setElementPrivate void setElementPrivate(void* priv): Set the given private data gpointer on the pad. This function can only be used by the element that owns the pad. No locking is performed in this function.
setEventFullFunctionFull void setEventFullFunctionFull(GstPadEventFullFunction event, void* userData, GDestroyNotify notify): Sets the given event handler for the pad.
setEventFunctionFull void setEventFunctionFull(GstPadEventFunction event, void* userData, GDestroyNotify notify): Sets the given event handler for the pad.
setGetrangeFunctionFull void setGetrangeFunctionFull(GstPadGetRangeFunction get, void* userData, GDestroyNotify notify): Sets the given getrange function for the pad. The getrange function is called to produce a new gstreamer.Buffer to start the processing pipeline. see GstPadGetRangeFunction for a description of the getrange function.
setIterateInternalLinksFunctionFull void setIterateInternalLinksFunctionFull(GstPadIterIntLinkFunction iterintlink, void* userData, GDestroyNotify notify): Sets the given internal link iterator function for the pad.
setLinkFunctionFull void setLinkFunctionFull(GstPadLinkFunction link, void* userData, GDestroyNotify notify): Sets the given link function for the pad. It will be called when the pad is linked with another pad.
setOffset void setOffset(long offset): Set the offset that will be applied to the running time of pad.
setQueryFunctionFull void setQueryFunctionFull(GstPadQueryFunction query, void* userData, GDestroyNotify notify): Set the given query function for the pad.
setUnlinkFunctionFull void setUnlinkFunctionFull(GstPadUnlinkFunction unlink, void* userData, GDestroyNotify notify): Sets the given unlink function for the pad. It will be called when the pad is unlinked.
startTask bool startTask(GstTaskFunction func, void* userData, GDestroyNotify notify): Starts a task that repeatedly calls func with user_data. This function is mostly used in pad activation functions to start the dataflow. The GST_PAD_STREAM_LOCK of pad will automatically be acquired before func is called.
stickyEventsForeach void stickyEventsForeach(GstPadStickyEventsForeachFunction foreachFunc, void* userData): Iterates all sticky events on pad and calls foreach_func for every event. If foreach_func returns FALSE the iteration is immediately stopped.
stopTask bool stopTask(): Stop the task of pad. This function will also make sure that the function executed by the task will effectively stop if not called from the GstTaskFunction.
storeStickyEvent GstFlowReturn storeStickyEvent(Event event): Store the sticky event on pad
unlink bool unlink(Pad sinkpad): Unlinks the source pad from the sink pad. Will emit the unlinked signal on both pads.
useFixedCaps void useFixedCaps(): A helper function you can use that sets the FIXED_CAPS flag This way the default CAPS query will always return the negotiated caps or in case the pad is not negotiated, the padtemplate caps.

Static functions

flowGetName string flowGetName(GstFlowReturn ret): Gets a string representing the given flow return.
flowToQuark GQuark flowToQuark(GstFlowReturn ret): Get the unique quark for the given GstFlowReturn.
getType GType getType()
linkGetName string linkGetName(GstPadLinkReturn ret): Gets a string representing the given pad-link return.
modeGetName string modeGetName(GstPadMode mode): Return the name of a pad mode, for use in debug messages mostly.

Variables

gstPad GstPad* gstPad;: the main Gtk struct

Inherited Members

From ObjectGst

gstObject GstObject* gstObject;: the main Gtk struct
getObjectGstStruct GstObject* getObjectGstStruct(bool transferOwnership): Get the main Gtk struct
getStruct void* getStruct(): the main Gtk struct as a void*
getType GType getType()
checkUniqueness bool checkUniqueness(ListG list, string name): Checks to see if there is any object named name in list. This function does not do any locking of any kind. You might want to protect the provided list with the lock of the owner of the list. This function will lock each GstObject in the list to compare the name, so be careful when passing a list with a locked object.
defaultDeepNotify void defaultDeepNotify(ObjectG object, ObjectGst orig, ParamSpec pspec, string[] excludedProps): A default deep_notify signal callback for an object. The user data should contain a pointer to an array of strings that should be excluded from the notify. The default handler will print the new value of the property using g_print.
refSink void* refSink(void* object): Increase the reference count of object, and possibly remove the floating reference, if object has a floating reference.
replace bool replace(ObjectGst oldobj, ObjectGst newobj): Atomically modifies a pointer to point to a new object. The reference count of oldobj is decreased and the reference count of newobj is increased.
addControlBinding bool addControlBinding(ControlBinding binding): Attach the gstreamer.ControlBinding to the object. If there already was a gstreamer.ControlBinding for this property it will be replaced.
defaultError void defaultError(ErrorG error, string debug_): A default error function that uses g_printerr() to display the error message and the optional debug string..
getControlBinding ControlBinding getControlBinding(string propertyName): Gets the corresponding gstreamer.ControlBinding for the property. This should be unreferenced again after use.
getControlRate GstClockTime getControlRate(): Obtain the control-rate for this object. Audio processing gstreamer.Element objects will use this rate to sub-divide their processing loop and call gst_object_sync_values() in between. The length of the processing segment should be up to control-rate nanoseconds.
getGValueArray bool getGValueArray(string propertyName, GstClockTime timestamp, GstClockTime interval, Value[] values): Gets a number of gobject.Values for the given controlled property starting at the requested time. The array values need to hold enough space for n_values of gobject.Value
getName string getName(): Returns a copy of the name of object. Caller should g_free() the return value after usage. For a nameless object, this returns NULL, which you can safely g_free() as well.
getParent ObjectGst getParent(): Returns the parent of object. This function increases the refcount of the parent object so you should gst_object_unref() it after usage.
getPathString string getPathString(): Generates a string describing the path of object in the object hierarchy. Only useful (or used) for debugging.
getValue Value getValue(string propertyName, GstClockTime timestamp): Gets the value for the given controlled property at the requested time.
getValueArray bool getValueArray(string propertyName, GstClockTime timestamp, GstClockTime interval, uint nValues, void* values): Gets a number of values for the given controlled property starting at the requested time. The array values need to hold enough space for n_values of the same type as the objects property's type.
hasActiveControlBindings bool hasActiveControlBindings(): Check if the object has active controlled properties.
hasAncestor bool hasAncestor(ObjectGst ancestor): Check if object has an ancestor ancestor somewhere up in the hierarchy. One can e.g. check if a gstreamer.Element is inside a gstreamer.Pipeline
hasAsAncestor bool hasAsAncestor(ObjectGst ancestor): Check if object has an ancestor ancestor somewhere up in the hierarchy. One can e.g. check if a gstreamer.Element is inside a gstreamer.Pipeline
hasAsParent bool hasAsParent(ObjectGst parent): Check if parent is the parent of object. E.g. a gstreamer.Element can check if it owns a given gstreamer.Pad
ref_ ObjectGst ref_(): Increments the reference count on object. This function does not take the lock on object because it relies on atomic refcounting.
removeControlBinding bool removeControlBinding(ControlBinding binding): Removes the corresponding gstreamer.ControlBinding If it was the last ref of the binding, it will be disposed.
setControlBindingDisabled void setControlBindingDisabled(string propertyName, bool disabled): This function is used to disable the control bindings on a property for some time, i.e. gst_object_sync_values() will do nothing for the property.
setControlBindingsDisabled void setControlBindingsDisabled(bool disabled): This function is used to disable all controlled properties of the object for some time, i.e. gst_object_sync_values() will do nothing.
setControlRate void setControlRate(GstClockTime controlRate): Change the control-rate for this object. Audio processing gstreamer.Element objects will use this rate to sub-divide their processing loop and call gst_object_sync_values() in between. The length of the processing segment should be up to control-rate nanoseconds.
setName bool setName(string name): Sets the name of object, or gives object a guaranteed unique name (if name is NULL). This function makes a copy of the provided name, so the caller retains ownership of the name it sent.
setParent bool setParent(ObjectGst parent): Sets the parent of object to parent. The object's reference count will be incremented, and any floating reference will be removed (see gst_object_ref_sink()).
suggestNextSync GstClockTime suggestNextSync(): Returns a suggestion for timestamps where buffers should be split to get best controller results.
syncValues bool syncValues(GstClockTime timestamp): Sets the properties of the object, according to the gstreamer.ControlSources that (maybe) handle them and for the given timestamp.
unparent void unparent(): Clear the parent of object, removing the associated reference. This function decreases the refcount of object.
unref void unref(): Decrements the reference count on object. If reference count hits zero, destroy object. This function does not take the lock on object as it relies on atomic refcounting.
addOnDeepNotify gulong addOnDeepNotify(void delegate(ObjectGst, ParamSpec, ObjectGst) dlg, ConnectFlags connectFlags): The deep notify signal is used to be notified of property changes. It is typically attached to the toplevel bin to receive notifications from all the elements contained in that bin.

gstreamer Pad classes

Pad